Category: B.One Middleware
Room Climate Dashboard based on B.One Middleware Part 1: A Sample Implementation
Vital Signs Monitoring with IoT & LoRaWAN® – Tektelic eDoctor Chest Strap vs. Apple Watch Series 5 (Part 3 – During Exercise)
– 📖🕓 ≈ 7 min – After I presented the two devices last time, it can slowly get down to business. So far I have already recorded my training sessions in…
Monitoring Vital Signs with IoT & LoRaWAN® – Tektelic eDoctor Chest Strap vs. Apple Watch Series 5 (Part 2 – Device Presentation)
– 📖🕓 ≈ 5 min – As mentioned in my last article, I use two different devices for monitoring. My Apple Watch Series 5 and the eDoctor device from TEKTELIC Communications…
Vital Signs Monitoring with IoT & Lorawan – Tektelic eDoctor Chest Strap vs. Apple Watch Series 5 (Part 1 – Foreword)
– 📖🕓 ≈ 3 min – The monitoring of vital data such as heart rate and respiratory rate or the number of steps taken has been a trend for years. It…
B.One Community, Gallery, Middleware & ZENNERShop – how is it all connected?
– 📖🕓 ≈ 3 min – In the past and also in the coming articles you have already read a lot about the B.One Middleware, B.One Gallery, Gateways, IoT PLUG&PLAY and…
B.One Middleware Howto: Connection to the IoT Platform Thingsboard
– 📖🕓 ≈ 6 min – In my last two articles I have already shown you how you can connect the B.One.Middleware to the IoT platforms TagoIO and Kaa. In this…
B.One Middleware Howto: Connection to the IoT Platform Kaa
– 📖🕓 ≈ 6 min – In my last article I already showed you how you can connect the B.One Middleware to the IoT platform TagoIO. Today we come to the…
B.One Middleware Howto: Connection to the IoT Platform TagoIO
– 📖🕓 ≈ 6 min – As you may already know, the versatile B.One Middleware can be flexibly connected to various IoT systems. In the following small series of articles I…
Grafana Howto: From B.One Middleware via MQTT to InfluxDB
– 📖🕓 ≈ 5 min – In the last articles you have already been given a small introduction to the open source tool Grafana. It was also reported how to install…